
Remove rust and paint with light, not chemicals.
Clean metal without solvents, acid baths or abrasive media. Because it’s handheld, you can clean large or fixed parts in place, with no tank needed.
- No chemical cleaning agents or chemical waste from the process
- Q-pulse fiber laser for rust and paint removal
- Leaves a surface ready for welding, painting or coating
- Used with laser safety eyewear and a fume extractor
Specifications:
| Type | MY-C200H | |||||||||
| Power | 200W / 300W / 500W /1000W | |||||||||
| Max. Cleaning Width | 10~100mm | |||||||||
| Laser Source | JPT | |||||||||
| Scan Head | Ralfar | |||||||||
| Controller | Ralfar | |||||||||
| Lifespan of Fiber Laser Source | 100,000 Hours | |||||||||
| Frequency | 1-4000KHZ | |||||||||
| Q Pulse | 8-500ns | |||||||||
| Cooling Mode | Air Cooling | |||||||||
| Power Comsuption | ~1.0KW/H | |||||||||
| Dimension | 82×62×102CM | |||||||||
| Package Size | 100*80*123cm | |||||||||
| Net Weight | 80KG | |||||||||
| Gross Weight | 130KG | |||||||||
LASER SAFETY WARNING
This laser must be operated only in a designated laser-controlled room. Appropriate laser safety glasses rated for the laser’s specific wavelength and power must be worn at all times when required by safety procedures. Only trained and authorized personnel may operate the laser. Never look directly into the laser beam or its reflections.