Laser Marking & Engraving machine Class-IV.


Laser Marking & Engraving machine with Safety Enclosure.

Fiber Laser Marking Machine

FEATURES:

1) Lifespan of fiber laser source: 100,000 hours. 

2) Low consumption: <450W, more economical and environmental.

3) High Speed: 7000mm/s, faster than traditional machines.

4) Superior Laser Beam: The definition is 1 micron, 10 times as traditional products.

5) No Consumables: One marker can work for more 8-10 years without any consumables.

6) The fiber laser beam comes out from the fiber laser source directly, no need to adjust the   laser beam path. 

7) High-precision and high-speed scan head, with good seal, capable to prevent dust and   water, small volume, compact.

8) High-stability controller, USB interface, swift and stable transmission, route optimization,   easy operation. 

9) Compatibility: PLT, BMP, JPG, TTF, DXF, SHX, AI and other format files output from   CorelDraw, AI, PS, AutoCAD, Solidworks etc…

10) Integrated Air-Cooling System: Better cooling effect than water-cooling effect in YAG laser,   no maintenance.

Advantages 

1) Fully enclosed structure design, with a sturdy protective shell, protect the operator from   laser radiation. 

2) Adopt high-series JPT / GZ laser source, superior laser beam, stable performance and high   reliability.  3) The machine can work with all metallic materials, such as gold, silver, copper, stainless,   aluminum, etc.; and some non-metallic materials.

Application – Fiber Laser

Laser Marking Machine for Metal & Plastics. It can work with most metal marking applications, such as Stainless Steel, Brass, Aluminum, Steel, Iron etc., and can also mark on many nonmetallic materials, such as ABS, Nylon, PEEK, PE, PVC, etc. 

1) Electronic Components: Resistors, Capacitors, Chips, Printed Circuit Boards, Computer   Keyboard, etc. 

2) Mechanical Parts: Bearings, Gears, Standard Parts, Motor, etc. 

3) Instrument: Panel Board, Nameplates, Precision equipment, etc. 

4) Hardware Tools: Knives, Tools, Measuring Tools, Cutting Tools, etc. 

5) Automobile Parts: Pistons and Rings, Gears, Shafts, Bearings, Clutch, Lights, etc. 

6) Daily Necessities: Handicrafts, Zipper, Key Holder, Sanitary Ware, etc.

Sample Gallery – Fiber Laser Marking

Specifications – Fiber Laser

ModelFL-20, 30, 60 & 80; FLE-20, 30, 60 & 80
Power20W / 30W / 60W / 80W
Laser Wavelength1064nm
Standard Marking Area150*150mm (450mm Motorized Z column)
Optional Marking Area70*70mm | 110*110mm | 150*150mm | 175*175mm | 200*200mm | 300*300mm
Marking Depth≤2mm
Marking Speed7000mm/s
Minimum Line Width0.015mm
Minimum Character0.2mm
Repeated Precision±0.003mm
Fiber Laser Source JPT / GZ
Scan HeadGalvo-Tech / WISE SCAN
Controller (software)BJJCZ Controller & EzCAD2 Software (Optional EzCAD3 or SAMLight)
Lifespan of Fiber Laser Module100,000 hours
Beam QualityM2 <1.3
Focus Spot Diameter<0.01mm
Output Power of LaserAdjustable: 10 ~ 100%
Output Frequency of LaserAdjustable: 1 ~ 4000KHz
System Operation EnvironmentWindows 10 / 11 – 64bits
Cooling ModeAir cooling
Input Voltage220V /50HZ /1PH or 110V /60HZ /1PH
Optional (available up on request)Rotary Module, X-Y Table, Auto-Focus, Automatic door (vertical/horizontal), Programmable Z-axis, Inspection Vision system, QR/Bar code interface, Fume Extraction, other features per customer requirements

Warranty 

2 years or 10,000 hours of operation (whichever comes first). 

Training

Operator training at AMTEC facility – No Charge
On-site training (at Customer facility) Available upon request