The AMTEC PureJet uses a catalytic process to convert VOC emissions to carbon dioxide. The catalytic bed is specially designed to manage the concentration and flow rates of the printers. This method is far more efficient than condensation systems, or the process of running exhaust gases into water baths, commonly found in competitive printers. Those methods do not eliminate hazardous waste. PureJet destroys over 95% of VOC's.
VOC Reduction
- Easy Set Up and Maintenance
- Rugged, Compact
- Increased Options
- Certifiable Performance
VOC Emission Reduction Device
Ink Jet Printing > VOC Emission Reduction Device
Specifications
Through its catalytic process, the PureJet reduces VOC emissions.
| Ink jet printer capability | AMTEC EXCEL Series models 100, 170i, 178i, 270i, 273se, P, HR, and Ultra. AMTEC 37 Series models 37e, 37ez, 37 plus. Supplied with mating connectors and 10 feet (3 m) of polyethylene tubing |
|---|---|
| Input Characteristics | Flow rate: 30 to 150 scfh. Concentration: 500 to 7000 ppm of VOC as propane |
Output Characteristics |
Less than 5% of VOC at input; less than 130 ppm of carbon monoxide |
| Operational Status Indicator Lights | Power on: green; At temperature: green; Over temperature: red |
| Power Requirements | Nominal 110 VAC at 50/60Hz; 600 watts typical; power cord 6 feet (1.8 m) long |
| Environmental Temperature/Humidity | Operation: 40 to 110°F (4 to 43°C); 10% to 90% RH without condensation |
| Enclosure | Brushed stainless steel drip proof cabinet |
| Dimensions | 16 inches (41 cm) high; 18 inches (46 cm) wide; 8 inches (20 cm) deep |
| Mounting | Floor or table; mounting hole provisions in feet |
| Weight | 27 lbs. (12.3 kg) unpacked; 30 lbs. (13.6kg) packed |
Contact Information
